Backlit Tradeshow Backdrop - Stand Out Series 10-20x8

Purchase with our Confidence Guarantee

Once your backdrop is finished, we test it out to make sure everything looks great. We will also take photos of the backdrop and send them to you before we ship it out.

10'x8' Stand Out Series SEG Fabric Backlit Trade Show Display

--

Lite SEG Fabric Lightbox Details

• SEG Fabric System with LED Backlighting – Vibrant graphics illuminated by built-in LEDs.
• Tool-Free Assembly – Quick and easy setup with no tools required.
• Integrated LED Lighting – Bright, energy-efficient lights built into the frame.
• Durable Silver Aluminum Frame – Sturdy and sleek, designed for long-lasting performance.
• Swivel Feet for Stability – Ensures your display stays secure, even in high-traffic areas.
• Portable, Heavy-Duty Travel Case – Semi-rigid case protects your display during transport.
• Conversion Kit for Versatility – Combine two 10x8 frames into one 20x8 display with conversion kit.

Actual Assembled Size:

• 10ft Display: 120" wx 91" h x 4" d
• 20ft Display: 240" w x 91" h x 4" d

Fabric Dye Sublimation Process

We use a Dye Sublimation printing process to print all of our fabric products. Dye Sublimation printing is a top-of-the-line printing process which produces vibrant, permanent printed graphics on soft polyester fabric. The dye-sublimation printer heats up to about 400 degrees to bond the dye to the fabric fibers permanently dying the fabric. The fabric print is long lasting and washable and won't peel off like other screen-printed fabric products.

Advantages of Dye Sublimation

• Graphics are permanent and waterproof
• Fabric is washable in cold water with air dry
• Colors are vibrant and long lasting
• True continuous tones equivalent to photographs

Aluminum Extrusion Frame

Warranty: Lifetime warranty on aluminum extrusion frame against manufacturer defects. Warranty does not cover damage due to accidents, abuse, or normal wear and tear. If your aluminum frame is found to be defective it will be replaced or repaired at the factory’s discretion.

LED Lights

LED lights come pre-installed into the aluminum panels. The lights will need a power source to plug into. It's best to check with the event first to make sure you'll have access to an electrical plug from your booth.

• Watts needed: 150W
• Amps needed: 6.25A
• Volts: 120-240V

What's in the Box?

10ft Display

• 4 Side panel extrusions
• 3 Bottom panel extrusions with lights and swivel feet
• 3 Top panel extrustion with lights
• 5 Verticle support bars (1 extra bar for extention kit)
• 3 Horizontal support bars
• 2 Cross sections to hold support bars
• 1 Electrical cord
• 1 Printed graphic
• 1 Lightblocking liner or 2nd printed graphic
• 2 Add on wheels for carrying case
• 1 Semi-rigid carry case

20ft Display

• 8 Side panel extrusions
• 6 Bottom panel extrusions with lights and swivel feet
• 6 Top panel extrustion with lights
• 10 Verticle support bars (2 extra bars for extention kit)
• 6 Horizontal support bars
• 4 Cross sections to hold support bars
• 2 Electrical cord
• 1 Printed graphic
• 1 Lightblocking liner or 2nd printed graphic
• 4 Add on wheels for carrying case
• 2 Semi-rigid carry case

Conversion Kit

• 2 extension peices
• 1 cross section for support bars

Shipping Dimensions & Weights

• 10x8 Frame: 50.5" x 22" x 7" 65lbs
• 20x8 Frame: 2 boxes - 50.5" x 22" x 7" 65lbs

Production Time

Normal Production time is about 5-6 business days; however, we know sometimes you need things quickly! We're there for you, offering rush shipping options in the check out. To view our current shipping speeds and rates, add your display to the cart, add your shipping state and zip code into the shipping calculator. Check out the current FedEx Ground Shipping Transit times

Production time starts the next business day from proof approval.

Design specs for Stand Out Series Backlit Fabric Trade Show Display

Download the PDF template. Please make sure to remove all template lines from the print ready file before submitting your artwork for print.

Artwork should be set up at size or a proportional size:

• 10x8: 120.5" x 91.62"- Click to Download 10x8 Stand Out PDF Template
• 20x8: 120.5" x 45.81" (Half Size)- Click to Download 20x8 Stand Out PDF Template

Before you setup your file; Please view our Design Specs for Print Ready Files

• If you submit a file that is not print ready according to our specifications our graphics team may have to ask you to adjust the artwork and re-submit, which can delay the processing of your order.

Order Process

Order is placed: We will email you an order confirmation and your customer representative will be in touch during normal business hours.

Here is the next Steps:

Email proof

• Our graphics department will send you a proof via email

Proof Approval

• All proofs will need to be approved by you before printing

Printing

• Once approved the order will move to production where printing will start

Boxing

• When printing is complete your order will be boxed up and prepared for shipping

Shipped

• Your order will be picked up by FedEx at the end of the business day. We ship Monday - Friday, with the exception of holidays.

Tracking

• When your order is scanned in by Fedex you will receive an email from us with the tracking and expected delivery date.

If you have any questions, we are available:

Monday - Friday, with the exception of holidays

8:30am - 5pm EST

800-319-8184

SEG Backlit Lightbox Display Options Explained

Frame Options:

• 10x8: 1 10x8 frame with graphics
• 20x8: 2 10x8 frames with conversion kit and 1 20ft graphic

Add Backside Print?

• No, back will be unprinted opaque liner: The back will be a white light blocking material with a silicone edge
• Yes, add full color backside print: You will receive 2 full printed graphics, one for the front and one for the back.

Uploading your File(s)

• You can normally attach the file with the product order in the "File Upload" option on the product.
• Larger files can sometimes stall the order, if that is the case just remove the file from the product option and use the file upload link at the top of the site any time after your order is placed.

Care of the SEG Fabric LED Lightbox Displays

We use a dye sublimation process to print on lightweight 100% woven polyester crease resistant fabric. The dye sublimation process permanently dyes the fabric creating a vivid colorful graphic that does not peel or fade. Your custom printed fabric is washable and folds up for easy storage. 

Washing your fabric backdrop

• You can place your fabric into a washing machine on "Cold Setting", as long as it fits, to get out any dirt.
• To dry the fabric you should hang it back on the frame and let it air dry.  Being a polyester fabric it is almost dry as it comes of the spin cycle.

Steaming

• We recommend using a steamer to remove creases and wrinkles that may happen from folding

Lifespan

• Your printed fabric will last many years with normal care. Slight fading may occur with multiple washes and may also occur when exposed to direct sunlight for a long period of time.

DO NOT STORE FABRIC IN PLASTIC. STORE IN A COOL DRY PLACE

Use of the SEG Backlit Tradeshow Backdrop - Stand Out Series

--

Great for events like:

• Tradeshows
• Lectures
• Presentations
• Media events
• Retail Displays

Setup & Takedown

The process to set up the SEG Fabric Lightbox is a very simple and easy process. To learn how to do it you can watch the video on our youtube channel.

Tips:

• Do not have the power cord plugged into the power supply while assembling the display
• It's recommended to assemble the frame flat on the floor

Steps:

1. Push together the 3 bottom extrusions according to the numbers
2. Push together 2 side panels accordering to the numbers, do this for the left and right sides
3. Push together the 3 top extrusions according to the numbers
4. Lay out panels next to eachother on the floor
5. Flip the bottom and top on it's side, lights facing in
6. Attach the side panels onto the bottom panels
7. Attach the top panels onto the top of the side panels
8. Attach the inner support bars according to the numbers, by sliding the plastic hook into the hooks on the frame, use the crosses to hold together the bars
9. Fit your graphics into to the channel starting on the top left corner and working your way around the frame until the graphic is fully installed into the frame
10. Plug in the cord on the top and bottom end corners of the frame
11. Using 2 people on each end, carefully tilt up the frame
12. Carefully swivel the feet out on the bottom panels
13. Fit the 2nd graphic or light blocking liner in the channels on the back of the frame starting from the top left corner and working your way around the frame until it is fully installed
14. Connect power supply

Using the Conversion Kit:

1. Using a wrench or something simular, carefully bang out the plastic connecting peices on panels #s
2. Assemble bottom left, side and top of the 1st frame following the instructions below (do not attach right side panels)
3. Assemble bottom, right side and top of the 2nd frame (do not attach left side panels)
4. Using conversion kit connectors fit the 2 frames together in the middles
5. Attach the inner support bars according to the numbers, by sliding the plastic hook into the hooks on the frame, use the crosses to hold together the bars
6. Fit your graphics into to the channel starting on the top left corner and working your way around the frame until the graphic is fully installed into the frame
7. Plug in the cord on the top and bottom end corners of the frame on both sides (2 power boxes will be used, one on each end)
8. Using 2 or more people on each end, carefully tilt up the frame
9. Carefully swivel the feet out on the bottom panels
10. Fit the 2nd graphic or light blocking liner in the channels on the back of the frame starting from the top left corner and working your way around the frame until it is fully installed
11. Connect power supply

Common Questions

What does SEG stand for?

SEG stands for silicone edge graphics. The graphics will have a silicone strip sewn into all 4 sides. The silicone is then pushed into the channels of an aluminum extrusion frame, pulling the fabric tight.

Can I use the frame without the LED Lights?

Yes, you can, however, the lights already come pre-installed in the aluminum extrusion panels but you simply would not plug them in. The graphics will still be vibrant with or without the lights.

How many colors or details can I use in my artwork, will it cost extra?

You can use any number of colors or any amount of detail in your artwork without incurring any additional fees. We print our fabric with dye sublimation technology in full color and no matter how many colors or how detailed the artwork is, it won't affect the cost of the sign.

What color profile should I use in my artwork?

We accept CMYK, RGB, Mixed colors and Pantone colors. We use a 4-color process, and each color profile will be converted to meet the original coloring as closely as possible. 

When will I get a proof?

Typically, you'll receive a proof via email from our graphics department within 1-2 hours of placing the order, if the order is placed during regular business hours of 8:30am - 5pm EST, Monday - Friday, with the exception of holidays. If you place your order during off hours/days, you'll receive a proof 1-2 hours from the time we re-open.

I don't have a print ready file or software to set up artwork, how can I get artwork set up?

Unfortunately, we don't offer artwork set up in house. Good websites to find graphic designers are fiverr.com or 99designs.com. If you are not able to find a designer please contact us and we can refer you to freelance designers we work with often.

I realized I sent the wrong file when I received the proof, what do I do?

No worries, this is why we send proofs! If you realized something is wrong in your artwork or sent the wrong file, simply respond to the graphics proof email, and let them know if you are sending a new file or have changes to your design online artwork. Our graphics team will always send you updated proofs, and nothing goes to print without your approval. 

I approved of the proof then realized it was wrong, what do I do?

We work fast over here, once the proof is approved it moves to production quickly. If you realize the proof was wrong after approving contact us as soon as possible. We can try to holt production if your order has not started to print yet. Once it starts printing it will be hard to pull it back at that point so the sooner you can let us know the better chances, we have to stop it.