About This Item
- Details
- Design Specs
- Order Process
- Option Details
- Care and Use
- Setup
- Q&A
- Video
10ft Canopy Tent Top Only
The 10ft canopy tent replacement graphic is printed on special water-resistant material and dries immediately during the even more special UV-cured printing process. Finished prints appear shiny and vivid and have added protection against natural elements.
Tent Details
- Fits a standard 10' x 10' canopy tent size
- Water resistant
- High quality full color print
- UV Fabric
- Wind speed rating 20-28 mph
Fits Canopy Dimensions: 118.75" W x 135"H x 118.75" D
Lifetime warranty on frame, 1 year warranty on graphic from manufacture defects
UV Fabric Material
600D Acrylic Coated Dye Sublimated tent Polyester fabric (UPF 50+ rated material), Hemmed around with black or white trim on seams, velcro sewn insides of each corner and reinforced sewn inside of peak.
What's in the Box?
- Custom printed UV Fabric Canopy
Shipping Dimensions
- 16” L x 13.5” W x 13.5” H 10 lbs
Production Time
Normal production time is 6-10 business days for most orders. Higher qty orders may require more time. Production time starts the next business day from proof approval.
Need it Faster?
We know you sometimes need things quickly! We're here for you offering rush shipping options in the checkout. To view our current shipping speeds and rates, add the canopy tent to the cart, add your shipping state and zip code into the shipping calculator. Check out the current FedEx Ground Shipping Transit times.
Design Specs for Canopy Tent Top Print Ready Files
Artwork should be set up at size or a proportional size:
Canopy Top Tent: 126" wide x 87" high, per side (4 total) (will be printed x4, unless separate graphics provided for each side)
Before you setup your file; Please view our Design Specs for Print Ready Files and if needed, Making Cut Lines In Your Files
NOTE: If you submit a file that is not print ready according to our specifications our graphics team may have to ask you to adjust the artwork and re-submit, which can delay the processing of your order.
Our Order Process
Order is placed: We will email you an order confirmation and your customer representative will be in touch during normal business hours.
Here's the next steps:
Email proof
Our graphics department will send you a proof via email
Proof Approval
All proofs will need to be approved by you before printing
Printing
Once approved the order will move to production where printing will start
Boxing
When printing is complete your order will be boxed up and prepared for shipping
Shipped
Your order will be picked up by FedEx at the end of the business day. We ship Monday - Friday, with the exception of holidays.
Tracking
When your order is scanned in by Fedex you will receive an email from us with the tracking and expected delivery date.
If you have any questions, we are available:
Monday - Friday, with the exception of holidays
8:30am - 5pm EST
800-319-8184
Canopy Tent Options Explained
Trim Color
- White: The trim around the canopy will be white
- Black: The trim around the conopy will be black
Upload Your Print Ready File
- Upload the file with the upload button
- If you have large or multiple files, use the "File Upload" link after the order is placed
Care & Use for the Canopy Tents
Cleaning your Tent
The canopy fabric has a protective layer that repels moisture to keep it dry in wet weather. Do not wash the canopy in a washing machine or use strong cleaning agents.
Cleaning your tent with warm water and mild soap, use a soft sponge to wipe it down to avoid scratching the graphic. Let it air dry.
Uses for your Canopy Tent
- Outdoor Fairs
- Swap Meets
- Athletic & Sporting Events
- Outdoor Dinning
- Patio Shade
- Beaches
- Festivals
- Street Fairs
- Tradeshows
Setting up your Canopy Tent
Easily Setup in minutes
- Take your frame and slightly expand it open to expose the corner bars
- Take your canopy graphic and place it on top of the frame
- Adhere each corner of the canopy to each corner of the frame. Inside each corner of the canopy, there is a strip of loop velcro sewn to it and each corner of the frame has a strip of hook velcro
- With the canopy securely in position, expand the frame until the corner latches lock into place
- Increase the height by extending the lower legs
- Pull each leg down until the latch locks into place
- Locate the Spindler under the canopy, in the middle of the frame. Pull the lever out and rotate to expand the upper peak pole. The dome cap will push out the canopy creating tension to flush out nay loose areas
Common Questions
What size tent does this canopy fit?
118.75" w x 135" h x 118.75 d
Can I use my tent outside?
Yes, the canopy tent is great for outdoors since it's water resistant. It's a good idea to ancor it down during windy days, a good wind can catch under the tent and tip it over.
How many colors or details can I use in my artwork, will it cost extra?
You can use any number of colors or any amount of detail in your artwork without incurring any additional fees. We print our fabric with dye sublimation technology in full color and no matter how many colors or how detailed the artwork is, it won't affect the cost of the sign.
What color profile should I use in my artwork?
We accept CMYK, RGB, Mixed colors and Pantone colors. We use a 4-color process, and each color profile will be converted to meet the original coloring as closely as possible.
When will I get a proof?
Typically, you'll receive a proof via email from our graphics department within 1-2 hours of placing the order, if the order is placed during regular business hours of 8:30am - 5pm EST, Monday - Friday, with the exception of holidays. If you place your order during off hours/days, you'll receive a proof 1-2 hours from the time we re-open.
I don't have a print ready file or software to set up artwork, how can I get artwork set up?
Unfortunately, we don't offer artwork set up in house. Good websites to find graphic designers are fiverr.com or 99designs.com. If you are not able to find a designer please contact us and we can refer you to freelance designers we work with often.
I realized I sent the wrong file when I received the proof, what do I do?
No worries, this is why we send proofs! If you realized something is wrong in your artwork or sent the wrong file, simply respond to the graphics proof email, and let them know if you are sending a new file or have changes to your design online artwork. Our graphics team will always send you updated proofs, and nothing goes to print without your approval.
I approved of the proof then realized it was wrong, what do I do?
We work fast over here, once the proof is approved it moves to production quickly. If you realize the proof was wrong after approving contact us as soon as possible. We can try to holt production if your order has not started to print yet. Once it starts printing it will be hard to pull it back at that point so the sooner you can let us know the better chances, we have to stop it.