About This Item
- Design Specs
- Order Process
- Option Details
- Care and Use
Acrylic Wall Standoff Sign Holder
This Acrylic Wall Display comes with 2 -Square high quality acrylic plates, predrilled. The Stainless Steel Standoffs are 3/4" diameter x 3/4" high. Eco-Lite Series standoffs are lightweight, sleek, and beautiful. Stainless steel construction, easy to install, brushed stainless finish, Flat Cap- M10 thread, screws included. When mounted to your wall the display will stand out 3/4" from the wall, giving your sign a beautiful contemporary appearance.
NOTE: Printed paper sign is not included
Acrylic Wall Sign Holder Details
- Clear Acrylic material
- Standoff sign holder
- Stainless Steel brushed finish standoffs included
- 2 acrylic pieces sandwhiched together
- Square Shaped
The sign holders are made of clear plastic acrylic sheets, .08" thick.
What's in the Box?
- 2 pieces of clear, pre-drilled acrylic sheets
- 4 stainless steel stand offs
Dimensions & Weights
Each acrylic sign is custom cut at the time of the order. Production time is about 3 business days, provided the acrylic is in stock. Higher qty orders may take longer to complete. Shipping time is additional.
Need it Faster?
We know you sometimes need things quickly! We're here for you offering rush shipping options in the checkout. To view our current shipping speeds and rates, add the sign holder to the cart, add your shipping state and zip code into the shipping calculator. Check out the current FedEx Ground Shipping Transit times
Order Process for the Acrylic Sign Holders
Order is placed: We will email you an order confirmation and your customer representative will be in touch during normal business hours.
Here is the next Steps:
- Your order will move quickly to our production department where they will cut your frame to size and prepare it for the shipping department.
- Your order will be boxed up and prepared for shipping
- Your order will be picked up by FedEx at the end of the business day. We ship Monday - Friday, with the exception of holidays.
- When your order is scanned in by Fedex you will receive an email from us with the tracking and expected delivery date.
If you have any questions, we are available:
Monday - Friday, with the exception of holidays
8:30am - 5pm EST
Care & Use for the Acrylic Sign Holders
The acrylic sign holders are great signage solutions that allows you to easily display and change out graphics. The sign holders can be mounted to any verticle surface in either portrait or landscape orientation.
Common Uses for the Acrylic Signs
- Office Signage
- Resturant Menus
- Wayfinding Signs
- Hospital Signage
- Hotel Signage
- School Signage
Set up of your Acrylic Sign Holder
Setting up your sign holder is easy. This holder is meant to hold a standard sheet of paper, centered in the middle of 2 plates of 14" x 20" acrylic. A piece of tape on the inside of the bottom plate should hold on your print without it sliding. You can set it up either horizontal or vertical. Mark and measure your wall (you can use the predrilled holes in the acrylic to mark the wall).
You can use the screws directly into a wood surface, or use the plastic shields for drywall application. For concrete or block you will need to purchase some concrete screws. Once all the standoffs are installed simply attach the acrylic sheets and screw in the knob.
Changing the "floating" graphic
To change the print inside, simply remove all the cap knobs by unscrewing them. Be careful as the acrylic sheets will not be held on when the knobs are removed. Place the back acrylic sheet on a table and using a small piece of removable double sided tape on the top back, center up your printed sign and stick to the back acrylic. Then place the front acrylic sheet over the print and while holding together, screw in the cap knobs into the standoffs on the wall through the acrylic sheets.
Where are these signs made?
Our acrylic signs are made in our warehouse located in Manchester, Connecticut. We custom cut each acrylic sign holder when ordered.
What color are the standoffs?
The standoffs are a brushed silver
What is it called a "standoff" sign?
The acrylic signs are called "standoffs" because when the sign is not flush with the wall but stands off from the wall. The peices of hardware is referred to as stand off screws, which mounts the sign to the wall. It's approx. a 1" gap between the wall and sign.