20' x 8' Pop Up Display

20' x 8' Tension Fabric Pop Up

Pop Up Displays can create a graphic wall for an event or trade show in seconds. Fastest setup of all the portable walls and folds down to a convenient carry size. All fabric is printed using a dye sublimation process that is very durable, washable, and has an inviting soft look. Step up to fabric for your next event and feel the difference. Add lights and really set yourself apart.

• High Resolution graphics printed directly on to fabric
• Easy set up within 5 minutes with 1 person
• No tools needed
• Vibrant dyed fabric included
• Waterproof and washable fabric
• Wrapped end caps with graphics included (standard)
• Easily change fabric prints that are attached with 2" velcro
• Folds down to 32" x 22" x 12"
• Actual set up size 176.75"W x 89.5"H x 11.75"D
• Expanding aluminum frame comes with fabric attached when stored

Straight Frame Size: 234" Face Width x 89.5" High x 11.75" side depth

Purchase with our Confidence Guarantee

Once your backdrop is finished, we test it out to make sure everything looks great. We will also take photos of the backdrop and send them to you before we ship it out.

Compare our Zip Stands Vs Pop Ups

Fabric Dye Sublimation Process

We use a Dye Sublimation printing process to print all of our fabric products. Dye Sublimation printing is a top-of-the-line printing process which produces vibrant, permanent printed graphics on soft polyester fabric. The dye-sublimation printer heats up to about 400 degrees to bond the dye to the fabric fibers permanently dying the fabric. The fabric print is long lasting and washable and won't peel off like other screen-printed fabric products.

Advantages of Dye Sublimation

• Graphics are permanent and waterproof
• Fabric is washable in cold water with air dry
• Colors are vibrant and long lasting
• True continuous tones equivalent to photographs

Pop Up Expanding Frames

The Pop Up frames are made of aluminum struts with plastic joints and ends. The sections of the frame allow the frame to expand to full size while pulling the fabric tight and when you're done the frame will collapse into a smaller size making it easy to travel with and store. The frame has velcro around its edges that holds the fabric in place, the fabric can remain on the frame when collapsed and stored away.

Light Blocking Liner

Our light blocking liners are made of a gray fabric material specially designed to block out any traveling light. We recommend adding a light blocking liner to your Pop Up Frames because they tend to allow a lot of light to flow through the fabric causing a shadow of the frame.

If you have placing your Tension Fabric Pop Up Display against a solid wall and there won't be any light sources behind it then you won't need a light blocking liner.

LED Lights & Hard Carrying Case (Not Included)

Our LED Lights are 18w and they clip on the top of the pop up frame. Lights are a great way to draw attention to your display. Keep in mind the lights do have a cord and will need to be plugged in, you'll want to check with the event hall to see if you need special permissions to use the lights with your display. LED lights are not recommended for double sided displays, due to the cords hanging down from the lights. See our LED Lights section for more information.

The hard carrying case makes it easier to travel with your zip stands as well as offering extra protection. The hard carrying cases can fit the zip stand frames and fabric. Keep in mind we don't recommend using the hard case as a shipping case, in our experience shipping the case as is tends to be too rough on the locks, latches and joints on the cases and they tend to break very easily during shipping. Also, most shipping carriers will charge you an extra fee for shipping the case without a corrugated box. See our Medium 3 Hard Case for more information.

Dimensions & Weights

Frame Only Shipping Box: 35" x 20" x 13" 38lbs

Frame with Fabric Shipping Box: 35" x 20" x 13" 48lbs

Shipping Box with Hard Case: 40" x 28" x 17" 80lbs

Need it Faster?

Normal Production time is about 4 business days; however, we know sometimes you need things quickly! We're there for you, offering rush production options for an extra fee as well as rush shipping options in the check out.

Production time starts the next business day from proof approval.

Current Production Times:

• 4 Day Production
• 3-Day Production upgrade
• 2- Day Production upgrade
• 1-Day Production upgrade

To view our current shipping speeds and rates, add your Zip Stand Combo to the cart, add your shipping state and zip code into the shipping calculator. Check out the current FedEx Ground Shipping Transit times

Design Specs for 20' x 8' Fabric Pop Up Display

Download the PDF template. Please make sure to remove all template lines from the print ready file before submitting your artwork for print.

Artwork should be set up at size or a proportional size:

• 20' x 8' Pop Up PDF Template (Half Size): 133" wide x 45.5" tall (Half Size)

Before you setup your file; Please view our Design Specs for Print Ready Files

• If you submit a file that is not print ready according to our specifications our graphics team may have to ask you to adjust the artwork and re-submit, which can delay the processing of your order.

Tension Fabric Pop Up Display Options Explained

Production Time (Production time starts the next business day from proof approval)

• Standard Turnaround (4 business days)
• 72 Hour - 3 Business Days
• 48 Hour - 2 Business Days
• Next Business Day

Light Blocking Liner

Because of the structure of the pop up frame, shadows can be seen from the front side if there is backlighting. The light blocking liner is made of an opaque material that blocks any backlighting from creating these shadows onto the graphic. The liner is recommended if you're unsure about the lighting at your event especially if you will not be using the add-on lights. The liner will be shipped folded, unattached from the frame. Upon receipt, the liner is applied by hooking the square holes over the front top knuckles of the frame draping the rest along the backside of the frame. To keep the liner in place, velcro strips are placed on the back top knuckles of the frame as well as the bottom left and right corners of the fabric. When it's time to disassemble, the liner needs to be removed before collapsing the frame

• No: No light blocking liner will be added
• Yes: opaque material that blocks out light will be added to the display

LED Lights

• None: no lights will be provided
• Add 3 LED Lights: LED lights that slide onto a clip at the top of the frame. You always want light on your display and the more the better. We recommend at least 3 LED lights for the 10x10 Popup Frame. The 10 ft wide frame has attachment light brackets on the frame for up to 5 lights.

Uploading your File

• You can normally attach the file with the product order in the "File Upload" option on the product.
• Larger files can sometimes stall the order, if that is the case just remove the file from the product option and use the file upload link at the top of the site anytime after your order is placed.

Care & Use of the Pop Up Displays

We use a dye sublimation process to print on lightweight 100% woven polyester crease resistant fabric. The dye sublimation process permanently dyes the fabric creating a vivid colorful graphic that does not peel or fade. Your custom printed fabric is washable and folds up for easy storage. 

Washing your fabric backdrop

• You can place your fabric into a washing machine on "Cold Setting", as long as it fits, to get out any dirt.
• To dry the fabric you should hang it back on the frame and let it air dry.  Being a polyester fabric it is almost dry as it comes out of the spin cycle.

Steaming

• We recommend using a steamer to remove creases and wrinkles that may happen from folding

Lifespan

• Your printed fabric will last many years with normal care. Slight fading may occur with multiple washes and may also occur when exposed to direct sunlight for a long period of time.

DO NOT STORE FABRIC IN PLASTIC. STORE IN A COOL DRY PLACE

Uses for your Tension Fabric Pop Up Display

Tension fabric pop up displays are popular because they are so easy to set up and take down. No tool required, simply pull open the frame, snap the joints in place and tighten the fabric! Taking it down is just as easy.  The collapsible frame makes it easy to travel with. 

Great for events like:

• Tradeshows
• Lectures
• Presentations
• Media events
• Retail Displays

Setting Up Your Pop Up Display

The process to set up the pop up is a very simple and easy process. To learn how to do it you can watch the video on our youtube channel.

Changing the Graphic

The tension fabric display graphic has velcro sewn onto the back to allow it to attach to the frame.  To replace the fabric, simply lay the frame down and release the velcro.  Take your new fabric and attach it to the velcro on the frame and you are done. Watch video on graphic replacement.

Placing your order online for the Tension Fabric Pop Up Displays

Order is placed: We will email you an order confirmation and your customer representative will be in touch during normal business hours.

Here is the next Steps:

Email proof

• Our graphics department will send you a proof via email

Proof Approval

• All proofs will need to be approved by you before printing

Printing

• Once approved the order will move to production where printing will start

Boxing

• When printing is complete your order will be boxed up and prepared for shipping

Shipped

• Your order will be picked up by FedEx at the end of the business day. We ship Monday - Friday, with the exception of holidays.

Tracking

• When your order is scanned in by Fedex you will receive an email from us with the tracking and expected delivery date.

If you have any questions, we are available:

Monday - Friday, with the exception of holidays

8:30am - 5pm EST

800-319-8184

Common Questions?

Can my pop up display go outside?

While all of the components of the frame and fabric are water proof, and will withstand rain, they are not made to withstand a wind.  Wind will easily blow the frame over and damage it.  You can attach the frame to another structure, but you then run the risk of breaking the frame with the pressures the wind puts on the whole structure.

Is it easy to set up a Pop Up Display?

Yes, they are the easiest frames to set up.  Just a warning - never push the frame to open if you feel a resistance.  The resistance is not normal and usually means something is bound up (usually the fabric is attached on the frame is some place that it shouldn't be)

How many colors or details can I use in my artwork, will it cost extra?

You can use any number of colors or any amount of detail in your artwork without incurring any additional fees. We print our fabric using a digital technology, dye sublimation process and it prints just as a regular digital printer would. Since we are not using a screen printing process we are not limited to the colors to details like other fabric printers.

What color profile should I set up my artwork in?

We accept CMYK, RGB, mixed colors and Pantone colors. We do use a 4-color process and each color profile will be converted to meet the original coloring as closely as possible.

When will I get a proof?

Typically, you'll receive a proof via email from our graphics department within 1-2 hours of placing the order, if the order is placed during regular business hours of 8:30am - 5pm EST, Monday - Friday, with the exception of holidays. If you place your order during off hours/days, you'll receive a proof 1-2 hours from the time we re-open.

I don't have a print ready file or software to set up the artwork, how can I get artwork set up for my order?

Unfortunately, we don't offer artwork set up in house. Good websites to find graphic designers are fiverr.com or 99designs.com. If you are not able to find a designer please contact us and we can refer you to freelance designers we work with often.

I realized I send the wrong file when I received the proof, what do I do?

No worries, this is why we send proofs! If you realized something is wrong in your artwork or sent the wrong file, simply respond to the graphics proof email, and let them know if you are sending a new file. Our graphics team will always send you updated proofs, and nothing goes to print without your approval.

I approved of the proof then realized it was wrong, what do I do?

We work fast over here, once the proof is approved it moves to production quickly. If you realize the proof was wrong after approving contact us as soon as possible. We can try to holt production if your order has not started to print yet. Once it starts printing it will be hard to pull it back at that point so the sooner you can let us know the better chances, we have to stop it.