33.5" Exhibitor-Series Retractable Replacement Banner

33.5" Exhibitor-Series Retractable Replacement Banner

This banner will fit your Blue Wave 33.5" Wide Exhibitor Retractable Banner Base. This replacement graphic can be replaced inside the banner stand, it requires the current banner to be cut off the leader, reducing the leader size each time the banner is replaced.

We can replace the graphics for you, if you pay for shipping both ways. Once we receive your base we will install the new banner and send it back out to you. Please contact our customer representative team to make arrangements for us to swap out your graphics in the base of your pull up banner.

Exhibitor-Series Retractable Banner Stand Details

• Graphic is 33.25" wide with 79"
• Includes printed graphic on low curl Matte PET vinyl banner material

• Comes with tape on the back of the bottom of the banner

Vinyl PET Material

We use a super smooth premium 13oz low curl PET vinyl with a light blocking layer. The vinyl is a matte white making it ideal for vivid, high-resolution graphics.

The acronym, PET stands for Polyethylene Terephthalate. Polyethylene is a polymerized thermoplastic ethylene resin, used to make the vinyl film and Terephthalate is a thermoplastic polyester resin made from ethylene glycol and terephthalic acid, also used to make films or fibers, like what is used for water bottles

What's in the Box?

• Printed vinyl graphic

Dimensions & Weights

Shipping Box: 37" x 10" x 5" 12lbs

Need it Faster?

Normal Production time is about 4 business days; however, we know sometimes you need things quickly! We're there for you, offering rush production options for an extra fee as well as rush shipping options in the check out.

Production time starts the next business day from proof approval.

Current Production Times:

• 2 Day Production
• 24 Hour Production upgrade

To view our current shipping speeds and rates, add your Pop Up Display to the cart, add your shipping state and zip code into the shipping calculator. Check out the current FedEx Ground Shipping Transit times

Design Specs for 33.5" Wide Exhibitor Retractable Replacement Banner

Download the PDF template. Please make sure to remove all template lines from the print ready file before submitting the artwork.

Full size design layout should be:

33.5" Exhibitor Banner Stand 33.25" wide x 79" tall

Before you setup your file; Please view our Design Specs for Print Ready Files

• If you submit a file that is not print ready according to our specifications our graphics team may have to ask you to adjust the artwork and re-submit, which can delay the processing of your order.

Placing you order for the 33.5" Wide Exhibitor Series Replacement Banner

Production Time

• Standard Turnaround time (4 Business Days)
  
• 24 Hour Rush Production

Do you have your own print ready file?

• Upload the file with the upload button
• If you have large or multiple files, use the "File Upload" link after the order is placed

Order is placed: We will email you an order confirmation and your customer representative will be in touch during normal business hours.

Here is the next Steps:

Email proof: Our graphics department will send you a proof via email

Proof Approval: All proofs will need to be approved by you before printing

Printing: Once approved the order will move to production where printing will start

Boxing: When printing is complete your order will be boxed up and prepared for shipping

Shipped: Your order will be picked up by FedEx at the end of the business day. We ship Monday - Friday, with the exception of holidays.

Tracking: When your order is scanned in by FedEx you will receive an email from us with the tracking and expected delivery date.

If you have any questions, we are available:

Monday - Friday, with the exception of holidays

8:30am - 5pm EST

800-319-8184

Options Explained for 33.5" Wide Exhibitor Series Replacement Banner

Production Time

• Standard Turnaround time (4 Business Days): Production will start the next business day from when proof is approved and will ship out within approx. 4 business days.
  
• 24 Hour Rush Production: Production will start the next business day from when proof is approved and will ship out within approx. 1 business day.
  

Care and Use of Retractable Banner Stands

Pull up banners are popular because they are so easy to use. These tool free displays are also easy to travel with as well.

Cleaning your banner:

If you banner happens to get dirty you can wipe it down with a damp cloth. Don't use harsh chemicals because it could damage the ink or the banner material. Keep the base and inside banner dry.

Pulling up your banner:

When pulling up or retracting your banner from the base you will need to take special care to pull the banner straight up, evenly. Don't let go of the banner quickly, as it could slam into the base and break.

Uses for the Retractable Banners

Our retractable banners are great, since they are free standing and have a slim profile, they can be set up virtually anywhere. It's easy to move them and transport them too. Here's some places we commonly see pull up banner stands.

• Tradeshows
• Lectures and Presentations
• Retail Store Signage
• Advertisements
• Media Events
• Presentations

How to replace the banner in your stand

Tools you will need - razor knife or scissors, flat head screwdriver, Rubber mallet, Small nail (if pin in not in the stand) 

1. Remove the end caps

2. Pull out the banner as far as possible until the leader is showing (leader is below the banner seam). Pull out enough to work on it without losing it back into the base.

3. Insert the locking pin/nail into the side holes so that it locks the banner from going back into the stand.

4. At this point the banner should have no tension on it att all.

5. Measure down the leader 1" and mark the leader with a pencil.

6. Remove the old banner by either cutting it off or carefully pulling the banner away from the leader.

7. Carefully lay out the new banner the same way the old one came off.

8. Attach the new banner to the leader with the double sided tape provided on the new banner. Keeping the bottom of the new banner in alighment with your pencil marks.

The top bar attachment

1. Using a flat head screw driver slowly pry the clamp apart on the top bar. You will be inserting the screw driver from the top of the banner inbetween the aluminum. Slowly open the clamp by repeating the process down the top bar.
2. Insert the new banner into the top bar in the same way the old one came out.
3. With a rubber mallet, or a hammer with a block of wood, close the clamp bar again onto the new banner.
4. Press the image with a firm grip against the tube with your left hand. Remove the locking pin.
   • NOTE: The mechanism is now activated
5. Hold the image with both hands. Let the image carefully roll into the tube

Common Questions

Can I order a custom size banner stand?

Unfortunately, we are pretty limited to custom sizes when it comes to retractable banner stands, however, the Pro Series Banner Stand does come with a telescoping pole and it can be adjusted to different sizes than the standard 84" and 92". If you want a custom height please reach out to your customer service team and they can assist you.

Can I replace the graphic on my retractable banner stand?

If you purchased any of the Pro-Series retractable banner stands, those do come with the option to swap out the graphics. Unfortunately, any of the Exhibitor series banners cannot be replaced as the banner is permanently installed in the base and in order to replace the banner it would require you to cut part of the leader off and adhering the new banner to the remaining leader.

Can I use my retractable pull banner outside?

In our experience we do not recommend using your retractable banner stand outside. If you choose to use it outside be sure to protect it from any weather like rain or snow and keep in mind a strong enough wind can knock it over easily.

Can I make my retractable banner double sided?

We do offer a few double-sided retractable banner options, these banners will have two banners installed into the base of the stand. However, we are not able to make single sided banner stands double sided.

How many colors or details can I use in my artwork, will it cost extra?

You can use any number of colors or any amount of detail in your artwork without incurring any additional fees. We print our fabric with dye sublimation technology in full color and no matter how many colors or how detailed the artwork is, it won't affect the cost of the sign.

What color profile should I use in my artwork?

We accept CMYK, RGB, Mixed colors and Pantone colors. We use a 4-color process, and each color profile will be converted to meet the original coloring as closely as possible. 

When will I get a proof?

Typically, you'll receive a proof via email from our graphics department within 1-2 hours of placing the order, if the order is placed during regular business hours of 8:30am - 5pm EST, Monday - Friday, with the exception of holidays. If you place your order during off hours/days, you'll receive a proof 1-2 hours from the time we re-open.

I don't have a print ready file or software to set up artwork, how can I get artwork set up?

Unfortunately, we don't offer artwork set up in house. Good websites to find graphic designers are fiverr.com or 99designs.com. If you are not able to find a designer please contact us and we can refer you to freelance designers we work with often.

I realized I sent the wrong file when I received the proof, what do I do?

No worries, this is why we send proofs! If you realized something is wrong in your artwork or sent the wrong file, simply respond to the graphics proof email, and let them know if you are sending a new file or have changes to your design online artwork. Our graphics team will always send you updated proofs, and nothing goes to print without your approval. 

I approved of the proof then realized it was wrong, what do I do?

We work fast over here, once the proof is approved it moves to production quickly. If you realize the proof was wrong after approving contact us as soon as possible. We can try to holt production if your order has not started to print yet. Once it starts printing it will be hard to pull it back at that point so the sooner you can let us know the better chances, we have to stop it.